Bull's Eye KTM 250 300
|
|
|
|
|
SKU: BEY36
Weight: 1 lbs
Instant bolt in gratification
More power everywhere Not just on the bottom
Increased throttle response at all openings
Less chance of stalling More details...
|
|
|
|
Bull's Eye KTM 250 300
Bull's Eye KTM 250 300
|
|
|
|
| |
|
Product Details
|
|
he New Bulls-eye is the final word in airflow improvement for your carburetor. The Bulls-eye was designed by David Simon, the inventor of the first carb splitting device. Who better to know how to improve it than the guy who designed it in the first place. The reason that it works so much better than any other splitting device is simple. Air velocity is highest running along the surface of something. The carburetor only has two surfaces. The two opposite sides of the bore. In the middle of the carb throat, velocity is the lowest. The carb splitting devices currently available offer four surfaces. Each side of the bore and each side of the wing. The bulls-eye provides twelve surfaces. Each chamber has three surfaces, times four chambers. The velocity is three times higher. Not only do you lower turbulence of the incoming air, but the velocity is higher at all throttle openings. The results of the bulls eye are More power everywhere, Bottom to top. Not just on the bottom like other carburetor splitting devices. Increased throttle response at all Throttle openings. Less chance of stalling in tight low rpm situations.
|
|
|
|
